Lindapter® | Type CW | steel | hot dip galvanised | Cr(V) - free
These packing pieces are compatible with the Type A and Type B clamps and are used to increase
the clamping range to suit flange thicknesses. Types A and B are available with three different tail lengths (short, medium or long)and the correct combination of packing pieces should be used. The correct packing pieces can be found in the tables on the product data sheet.
Further information under Lindapter® type A or Lindapter®
These packing pieces are compatible with the Type A and Type B clamps and are used to increase
the clamping range to suit flange thicknesses. Types A and B are available with three different tail lengths (short, medium or long)and the correct combination of packing pieces should be used. The correct packing pieces can be found in the tables on the product data sheet.
Further information under Lindapter® type A or Lindapter®
Cr(VI) Note:
Cr(VI)-free
Risk hydrogen embrittlement:
Material:
Steel
Installation method:
Screwing in with a tool
Surface:
hot-dip galvanised
Product type:
Girder clamp
RoHS conformal:
Material:
Steel
All technical data refer to the measure mm
Datasheet: Girder Clamp Type B
Datasheet: Lindapter® Girder Clamp Type A
Application: Installation Girder Clamp Type B
