Lindapter® | Type AFCW | mild steel | hot dip galvanised | Cr(V) - free
Packing pieces are used to increase the clamping range to suit a range of flange thicknesses.The Type AF is available with two different tail lengths (short and medium) and the correct combination of packing pieces should be used, please see the table on the datasheet
Note
The AFCW has a slight bend along its centre line which flattens out during installation..
Further information under Lindapter®
Packing pieces are used to increase the clamping range to suit a range of flange thicknesses.The Type AF is available with two different tail lengths (short and medium) and the correct combination of packing pieces should be used, please see the table on the datasheet
Note
The AFCW has a slight bend along its centre line which flattens out during installation..
Further information under Lindapter®
Cr(VI) Note:
Cr(VI)-free
Risk hydrogen embrittlement:
Material:
Steel
Installation method:
Screwing in with a tool
Surface:
hot-dip galvanised
Application:
Joining by bolt, joining by screw
Product type:
Girder clamp
RoHS conformal:
Material:
Steel
All technical data refer to the measure mm
Declaration Of Performance: DoP 004
Application: Installation Lindapter® Girder Clamp Type AF
Datasheet: Lindapter® Girder Clamp Type AF