Lindapter® | Type AF | medium | steel | SG iron | hot dip galvanised | Cr(V) - free
The Type AF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool, alternatively use a Type AFW washer to convert the recess to a flat top. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Manufactured from SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection.
Features and benefits
High slip resistance clamp evaluated for tensile, frictional and combined load applications. 70kN static slip resistance or 250kN tensile (AF24 with 4 x property class 10.9 fasteners). Recess holds the bolt head captive (property class 8.8). Suitable for parallel and tapered flanges up to and including 10°. The tail spans slotted clearance holes. Independently approved for dynamic load applications to EN 1993-1-9.
Further information under Lindapter®
The Type AF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool, alternatively use a Type AFW washer to convert the recess to a flat top. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Manufactured from SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection.
Features and benefits
High slip resistance clamp evaluated for tensile, frictional and combined load applications. 70kN static slip resistance or 250kN tensile (AF24 with 4 x property class 10.9 fasteners). Recess holds the bolt head captive (property class 8.8). Suitable for parallel and tapered flanges up to and including 10°. The tail spans slotted clearance holes. Independently approved for dynamic load applications to EN 1993-1-9.
Further information under Lindapter®
Cr(VI) Note:
Cr(VI)-free
Risk hydrogen embrittlement:
Material:
SG iron
Installation method:
Screwing in with a tool
Surface:
hot-dip galvanised
Application:
Clamping connection, joining by bolt, joining by screw
Product type:
Girder clamp
RoHS conformal:
All technical data refer to the measure mm
Datasheet: Lindapter® Girder Clamp Type AF
Declaration Of Performance: DoP 004
Application: Installation Lindapter® Girder Clamp Type AF
