Lindapter® | Type A | short | steel | malleable iron | zinc plated | Cr(V) - free
The Type A girder clamp is used to achieve a fast steelwork fixing connection between two steel beams and is often used in a pair with Type B clamps. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Type A girder clamps can also be used on their own if one piece of the steelwork has been pre-drilled..
Funktion and Vorteile
Recessed top holds the bolt captive while the nut is tightened. Ideal for parallel flanges. Supports up to 78.8kN tensile in a four-bolt configuration. Independently approved for dynamic load applications to EN 1993-1-9.
Further information under Lindapter®
The Type A girder clamp is used to achieve a fast steelwork fixing connection between two steel beams and is often used in a pair with Type B clamps. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Type A girder clamps can also be used on their own if one piece of the steelwork has been pre-drilled..
Funktion and Vorteile
Recessed top holds the bolt captive while the nut is tightened. Ideal for parallel flanges. Supports up to 78.8kN tensile in a four-bolt configuration. Independently approved for dynamic load applications to EN 1993-1-9.
Further information under Lindapter®
Cr(VI) Note:
Cr(VI)-free
Risk hydrogen embrittlement:
Material:
Malleable cast iron
Installation method:
Screwing in with a tool
Surface:
zinc-plated
Application:
Clamping connection, joining by bolt, joining by screw
Product type:
Girder clamp
RoHS conformal:
All technical data refer to the measure mm
Declaration Of Performance: DoP 003
Application: Installation Lindapter® Girder Clamp Type A
Datasheet: Lindapter® Girder Clamp Type A