Lindapter® | Type AAF | steel | SG iron | hot dip galvanised | Cr(V) - free
The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C.
Features and benefits
High slip resistance clamp evaluated for tensile, frictional and combined load applications. Self-adjusts to suit flange thicknesses 6mm to 40mm (size M20). Safe working loads apply in temperatures as low as -60°C. Suitable for parallel and tapered flanges up to and including 10°. The tail spans slotted clearance holes. Independently approved for dynamic load applications to EN 1993-1-9.
Further information under Lindapter®
The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C.
Features and benefits
High slip resistance clamp evaluated for tensile, frictional and combined load applications. Self-adjusts to suit flange thicknesses 6mm to 40mm (size M20). Safe working loads apply in temperatures as low as -60°C. Suitable for parallel and tapered flanges up to and including 10°. The tail spans slotted clearance holes. Independently approved for dynamic load applications to EN 1993-1-9.
Further information under Lindapter®
Cr(VI) Note:
Cr(VI)-free
Risk hydrogen embrittlement:
Material:
SG iron
Installation method:
Screwing in with a tool
Surface:
hot-dip galvanised
Application:
Clamping connection, joining by bolt, joining by screw
Product type:
Girder clamp
RoHS conformal:
All technical data refer to the measure mm
Datasheet: Lindapter® Girder Clamp Type AAF
Declaration Of Performance: DoP 005
Application: Installation Lindapter® Girder Clamp Type AAF